English

PM Jumper

PM Fiber Collimator is the basic element for in-line PM fiber optics components, such as PM isolator and
PM FWDM. It has high extinction ratio, low insertion loss and high return loss. The unique processing and high
quality AR coating also enable this c
Description
Description
PM Fiber Collimator is the basic element for in-line PM fiber optics components, such as PM isolator and
PM FWDM. It has high extinction ratio, low insertion loss and high return loss. The unique processing and high
quality AR coating also enable this collimator to handle high power.
 

Specifications
Parameters Unit Values Note
Center Wavelength (λc) nm 106413101550 -
Operating Wavelength Range nm ±30 -
Max. Insertion Loss at 23℃,λc dB 0.5(1060nm) 、0.31310&1550nm 100% test
Min. Return Loss at 23℃,λc dB 50UPC),60APC 100% test
Min. Extinction Ratio at 23℃( For PM Fiber) dB 23 100% test
Fiber Tolerances % ±10  
Max. Optical Power (CW) mW 500 By design
Max. Tensile Load N 5 By design
Fiber Type - PM Panda Fiber or SM Fiber -
Operating Temperature -5 to +70 By design
Storage Temperature -40 to +85 By design
*The PM fiber and the connector key are aligned to the slow axis.
*The FC Connector with narrow Key (about 2.02mm Key Width).
 

Package Dimensions
 



Ordering Information

 PMP-①①-②②--
P-①①-②②--

①①: Wavelength
06 - 1064 nm
31 - 1310 nm
55 - 1550 nm
S - Specify

②②: Connector Type
(End 1/End 2)
1 - FC/UPC
2 - FC/APC
3 - SC/UPC
4 - FC/APC
5 - LC/UPC
6 - LC/APC
7 – SUS Ferrule
N - none

: Fiber Jacket
L - 900 μm loose tube ( red for PM)
C – 3mm Cable (Blue)
S - Specify

: Fiber Length
(fiber tolerance: +/-10%)
1 – 1m
S - Specify

: Fiber Type
1 – PM 980
2 – PM1310
3 – PM1550
4 – SMF28E+
5 – G657A
S - Specify



 

Review

A-ONE © All Rights Reserved.    POWERED BY UEESHOP